Are you looking for the complete guide for the Wavlink Wifi Extender Setup? Then you have reached the right platform. Here you will learn about the hardware setup, online activation, and requirements for the wifi extender device setup.
Now our reliance on the internet has increased. Several daily tasks and professional work are not possible without internet connections. So, it become essential for us to have a stable and reliable internet connection at our premises.
For an internet connection, you must have an internet router or modem. For the wifi signals, you can have a wireless modem. But the modem has some limitations. It only works for a limited range. Also, because of walls and other intrusions wifi signal gets low.
Therefore, to overcome these types of problems you can set up a wifi extender. It extends the wifi signal range in your premises. So, it makes your premises dead zone-free and enhances the signal range.
Therefore, if you have a larger space and want to extend the wifi signal then you should know how to do Wavlink Wifi Extender Setup.
Wavlink is a well-established and well-known company for providing the best wifi signal extender. Activating wave link device lets you have several benefits like:
- Easy Installation
- Enhance the Wifi signal range
- Eliminates the wifi signal dead zone area
- Low maintenance cost
So, let’s proceed and know the details. The details are discussed in the next part of this article.
Wavlink WIFI Extender Setup
Setting up the Waveling Wifi extender improves the wifi signal strength in your office or home. So, in short, we can say that knowing the setup process will let you have a seamless wireless signal on your premises.
One must know that you can do the Self-Installation. Yes, the process is very easy. All you need to do is follow the prompts and complete the process.
Therefore, we are here to guide you through the process one by one. So, just be patient and read the article carefully.
First of all, one must know that Wavelingk Wifi Extender Setup can be done as a repeater or AP Mode. There are just a few changes you need to make.
So, let’s proceed and learn how to set up a Wavlink Extender.
- Firstly, you need to purchase the Wavlink Extender device. There are different kinds of models available in the market. All have their specifications. So, you need to choose them wisely according to your needs.
- Thereafter, you need to do the initial settings or hardware settings. You need to connect the extender to the router.
- Now turn ON the extender using a power adaptor.
- Thereafter, you will have to follow the prompts to connect the wifi signal of your extender to your computer.
- At last, the setup process is completed and you can enjoy the wireless signals from the extender.
So, these are the necessary details. Kindly read and follow the instructions carefully to set up a wavlink extender. In case of any query, you can leave a comment below.
What are the requirements for the Setup?
So, it is easy for a nontechnical person to go through the Wavlink Wifi Extender Setup. But you need to know the requirements first. These requirements will let you experience a hassle-free setup process.
Therefore, let’s proceed further and take a look at the requirements for the activation.
- First of all, you are required a Wavlink Wifi extender device.
- Thereafter, you will need a POE device with the power adaptor.
- Also, you are required with an ethernet cable.
- Now one must have a computer, mobile phone, or laptop.
- Also, you need to find the optimal place for the extender setup.
These are some general requirements. You need to fulfill these requirements to complete the activation process.
How to do hardware settings for Extender Setup?
Now before proceeding with the process, one must have the initial settings. You need to connect your devices manually. Let’s know how to connect the Wav wifi extender with the router to receive and send wifi signals.
- Firstly, you need to unbox the extender. Here you will find the POE device, power adopter, cables, antennas, and guide.
- Now you have to connect the antennas to the extender. Make sure you have screwed the right antenna to the right port.
- After that, you will have to connect the ethernet cable to the Wavlink wifi extender and the other end of the ethernet to the POE Device.
- Now connect the POE device with the power adapter. And plug it into the power source.
- That is all you need to do for the hardware setting.
Note: If you want your extender to work as an Access point mode. Then you need to connect the POE device to the router. Also, you can connect your computer with the LAN Cable.
For that, you need to connect the LAN Cable with the POE and computer. But you need to make sure that the LAN cable does not exceed 60 meters.
Steps to follow for the Wavlink Wifi Extender as AP setting
AP stands for the Access Point. Yes, now the Wavlink Wifi Extender Setup can be done as an Access point. In short, your extender device can work as a router. For that, you will have to go through the setup.
So, here are the steps you need to follow.
- First of all, you need to go through the hardware setup. We have already discussed the process above in the article. You can read the instructions from there. There is only one change you need to do is connect the POE device with the router using an ethernet cable.
- Now your extender device is connected to the internet. But still, you are not able to connect your gadgets to the internet.
- So, in the next step, you will have to take your phone or laptop and look out for the Wavlink Wifi signals and connect it.
- Now you have to open the browser on your device and visit the address: 192.168.10.1
- If this address is not working then you will need to visit http://waplogin.link.
- Here you will find the login portal on your device.
- Now you need to enter admin in the place of username and click on the login button.
- After that, follow the prompts and set up a password.
- In the next step, go to the wifi signals and select LAN Bridge (AP).
- Now follow all the prompts and activate your device.
- At last, you will have your extender activated and now you can enjoy the internet.
Above are the essential steps that one must follow. Carefully follow the instructions and enjoy using the internet.
How to set the Wavlink wifi extender as a Repeater without the WPS button
Now one can also complete the Wavlink Wifi Extender Setup process and make it work as a repeater. Therefore, here in this paragraph, we are going to discuss how to set the wavelink extender as a repeater. So, follow the given instructions and complete the process.
- Firstly, complete the initial setup. You have to connect the POE device with the Wavlink wifi extender device.
- Now you will have to connect your device with the wifi signals. So, you need to check out for the Wavlink wifi signals. After that, click on it to connect.
- Next, open the browser on your mobile or laptop.
- Now enter the URL: http://waplogin.link or enter 192.168.10.1
- Thereafter, a login portal will open. Now you need to enter a username admin and click on the login button.
- Next, you will have to set a password.
- Now select the Wavlink wifi repeater mode.
- Thereafter, follow the instructions on the screen and complete the process.
So, these are the essential steps to follow for wave link Wifi Extender setup. In case of any doubt, feel free to ask us in the comment section below.
Related:
Conclusion
In final words, now you know the Wavlink Wifi extender Setup process. You know how to complete the initial setup for the activation process.
Thereafter, we have discussed the steps to activate your extender. So, now we hope that your queries are solved and you can self-install the Wavlink wifi extender.
In case you have doubts and your wifi extender is not working. Then you can ask in the comment section. Our dedicated team feels obliged to help you out with your queries.
Thank You!!
Frequently Asked Questions
What is the maximum length of ethernet we can use for the internet service?
One can use a maximum length of 100 meters. But if you want to have a good internet connection without any delay or interruption. Then the cable should not exceed 60 meters.
How can I do a Wavlink login for the AP Setup?
Firstly, you need to connect your device with the extender wifi signal. Thereafter, you need to open a web browser on your mobile phone or laptop.
Thereafter, you will have to enter URL 192.168.10.1 or you can go to the web address http://waplogin.link. Now you need to enter the username. You need to put the keyword admin in place of the username and click on the login button. That is it.
What are the steps to follow for the Wavlink Wifi extender setup without the WPS button?
Follow the prompts if you want the Wavlink Wifi extender setup without the WPS button.
1. Connect your extender and device as we have discussed above in the article.
2. Thereafter, connect your device with the Wavlink wifi signals.
3. In the next step, visit the IP address 192.168.10.1 and it will redirect you to the login portal.
4. Now login to the portal using admin as a username.
5. Thereafter, follow the instructions and complete the process.
What are the steps to follow for the Wavlink Wifi extender setup with the WPS button?
If you want to activate the Wavlink wifi extender with the router using the WPS button, then follow the instructions.
1. First put your router and extender near to each other.
2. Now give a power supply to the Wavlink extender to turn it ON.
3. Thereafter, press the WPS button on your repeater.
4. Also, press the WPS button on your router simultaneously.
5. Now keep both the button pressed until the lights get stable.
Once the light gets stable, then your extender is connected to your router. Now you can use it to enhance the internet signals.
What is the cost of a Wavlink wifi extender?
The cost of a Wavlink wifi extender differs depending on the features and model.
1. Wavlink N300 WiFi extender/repeater costs around $20
2. Wavlink AC600 WiFi 6 Extender costs around $30 to $40
3. Wavlink AX3000 WiFi 6 extender costs around $85 to $120
So, different models have different prices.
